Specifications:
Trigger the flash light separately (without flash transmitter) because there is a very sensitive light sensor in this wireless flash trigger
Trigger the flash light with the CTR-301P transmitter together
1/4 stand tripod screw hole can be mounted into the tripod, ballhead and so on
Trigger the studio strobe flash light via the PC cable (The little plug is 2.5mm, the big plug supports 6.35mm standard video flash jack)
The wireless flash trigger has 4 frequency channels
Use the transmitter and receiver to control the flash light (Use with the transmitter)
Use only the receiver (CTR-301P) to control the flash light (Use without the transmitter)
This wireless flash trigger is a non-OEM product
| Power Source: Transmitter: 23A, Receiver: | CR2 |
|---|
| Standby Output: Transmitter: 3uA, Receiver: | 0.9mA |
|---|
| Range: Transmitter: >30M, Receiver: | >10M(Light control) |
|---|
| Frequency Channel: | 4 |
|---|
| Operating Frequency: | 433MHz |
|---|
| Speed: | 1/250s |
|---|
| Size: | 55 x 50 x 20mm / 2.2 x 2.0 x 0.8in(L x W x H) |
|---|
Compatible with:
| Canon: | SpeedLite 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 430EX II, 420EX, 420EZ, 380EX |
|---|
| Nikon: | SpeedLite SB-900,SB-800, SB-600, SB-80, SB-28, SB-27, SB-26, SB-25, SB-24, SB-23, |
|---|
| Vivitar: | 283, 285HV |
|---|
| Sunpak: | 30DX, 422D, 433D, PZ5000AF |
|---|
| National: | PE-387S |
|---|
| Panasonic: | PE-28S |
|---|
USAGE:
| Use the transmitter and receiver to control the flash light (Use with the transmitter): | 1. Plug in the flashlight to the receiver's hot shoe socket, then switch to "W" mode, press the button on the transmitter. When the flash light is flashed, that's mean installed correctly, 2. Insert the transmitter to camera's hot shoe, and then you can trigger with your camera |
|---|
| Use only the receiver to control the flash light (Use without the transmitter): | Plug in the flashlight to the receiver's hot shoe socket, then switch to "L" mode, use the camera pop-up flash or other flash speedlight it, when the flashlight is flashed, that's mean installed correctly |
|---|
| Trigger the studio strobe flash light: | Through the PC sync port to convert the plug in the condition of wireless or light mode, insert the receiver into the PC port of video flash, which support the 6.35mm standard jack |
|---|
Package Included:
1 x Transmitter
1 x Receiver
1 x PC Sync Cable
1 x CR2 Battery
1 x User Manual
This product was added to our catalog on Monday 25 April, 2011.
